Wet and Dry Vacuum Specifications
| Wet and Dry Vacuum | |||
| Model | HHR46D | Charging Time | approx. 4 hours |
| Rated Voltage | 21.6 V | Rated Power | 400 W |
Clean Water Tank Capacity | 780 mL | Used Water TankCapacity | 700 mL |
| Operation Frequency | 2400~2483.5 MHz | ||
| Maximum Output Power | < 20 dBm | ||
Charging Base Specifications
| Charging Base | |||
| Model | HCBBD | Rated PowerInput* | 560 W |
| Rated Input | 220-240 V 50-60 Hz | Rated Output | 27.0 V 1.6 A |
Note:
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
*The rated input power refers to the arithmetic average of the drying power when "Deep-Clean" is selected in the "Self-Cleaning Settings" and "Super-Speed" is selected in the "Drying Settings" within the app.
Power consumption in standby mode: ≤ 0.5W（within 15 minutes after the
vacuum removed from the Charging Base )
Power consumption in standby mode: ≤ 0.5W（within 15 minutes after the
appliance is fully charged)
Power consumption in network standby mode: ≤ 2W（within 15 minutes after the
appliance is fully charged)