Screen Error
If the vacuum is not working properly, the screen display will show an error message. Please refer to the troubleshooting table to find your solution.
Error Icon | Status | Error Message | Solutions |
Blinking Red | High-temperature Alert | Please wait and continue to use after motor temperature is normal. | |
Blinking Orange | Roller brush stuck | Refer to the [Cleaning the Brush] section to clean the debris and hair tangled on the brush roller. | |
Blinking Orange | Air Duct Blocked | Check whether the dust cup, extension rod, or brush is blocked. Check whether the pre-filter or filter is blocked due to excessive dust. | |
| Blinking Orange | Filter is expiring | Please replace the filter in time. After replacing the filter, press and hold the trigger switch lock for 3 seconds to reset the filter. |
Solid Orange | Filter uninstalled | Ensure that the filter and pre-filter are installed correctly. | |
Solid Red | Error | Please contact the after-sales department for maintenance. |
Please note: If one of the error codes from E0 to E4 appears on the display, please contact the after-sales service team for repair.